Home Category Brands Manfrotto and Avenger Pantograph Top 4C 5/8'' @ Bottom (Female - Male) 14.9''-149''

Pantograph Top 4C 5/8'' @ Bottom (Female - Male) 14.9''-149''

MSRP: $799.00 USD

The pantograph is made of aluminium (P-Al MgSi UNI 3569) and manufactured according to DIN 15560-46. The attachments at both ends of the pantograph are 16mm, male on the bottom and female on the top. The load is supported by a steel cable of 2mm, diameter (safety factor 12). Loads up to 12kg can be suspended using only the patented friction device, while loads up to a maximum of 18kg require the use of the optional springs. The pantograph can be regulated to keep suspended loads from 1 to 18kg perfectly balanced. By turning the coloured notched ring you can adjust the pantograph?s friction; this will ensure that the load remains stable when set in position, but that it will move smoothly up and down when necessary. In any case, it is always advisable to use the springs to aid raising your pantograph. When choosing the additional spring(s) for your pantograph, you will first need to know exactly which model of pantograph you have, in order that you can select the spring of the correct length. If you have one of the new compact pantographs (with grey-painted ''scissors''), look at the colour of notched ring the 2m version has a red notched ring, while the 3.8m version has a blue notched ring. After having identified the length of the pantograph, choose the appropriate spring(s) by refering to the table below.

Would you like a Demo?
  • Sky track accessories
  • Studio accessories
  • Professional and reliable accessories
Weight 18.74 lbs (8.5 kg)
Clamps Accessories No
Sky Track Accessories No
Still Life Accessories No
Air Cushioned N/A
Top Attachment 5/8″ (16mm) socket
Payload (For Proper Usage, See Instruction Manual On Download Section 39.68 lbs (18 kg)
Attachment (Bottom) 5/8″ (16mm) stud
Color Black
Maximum Extension 149.61" (380 cm)
Minimum Extension 14.96" (38 cm)
Width 5.91" (15 cm)
Adjustable Tilting Back No

*Note: Vitec Imaging Solutions operates a policy of continuous development. Vitec Imaging Solutions reserves the right to make changes and improvements to any of the products described on this website without prior notice. Specifications are subject to change without notice. Please refer to the manufacturer's web page for the most up to date specifications and product details. www.vitecgroup.com